LABEL + Modifying Volume Labels
Allows you to modify, add, or delete a volume label.
MS-DOS equivalent: LABEL (3.0+)
[d:][path] LABEL [ld:][volumelabel]
[d:][path] Specifies the drive letter and path that
contain the LABEL command file.
[ld:] Specifies the drive letter of the disk
you wish to label.
[volumelabel] Specifies the label to be used to
identify the disk. The volume label can
contain up to 11 characters.
labels the disk in drive B as OCTSTMTS.
Cannot LABEL a Network drive
You cannot change an existing volume label or create a new one
for a network drive.
If you do not specify a label with the command, you will be
prompted for the label or for whether you want the existing label
to be deleted:
Volume in drive x is xxxxxxxxxxx
Volume label (11 characters, ENTER for none)?
[For related topics, press R]
|file: /Techref/dos/command/label.htm, 1KB, , updated: 1999/2/20 11:24, local time: 2017/10/17 19:23,
|©2017 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/dos/command/label.htm"> dos command label</A>
|Did you find what you needed?|
PICList 2017 contributors:
o List host: MIT, Site host massmind.org, Top posters @20171017 RussellMc, Van Horn, David, James Cameron, Sean Breheny, IVP, alan.b.pearce, Neil, David C Brown, Bob Blick, Denny Esterline,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!