please dont rip this site
FASTOPEN + Storing Recently Opened Files in Memory

Stores in memory the location of directories and recently

opened files so that files can be located quickly.

VERSION

PC-DOS 3.3

TYPE

External

SYNTAX

[d:][path] FASTOPEN pd:[=nnn]

OPTIONS

[d:][path] Specifies the drive letter and path that

contain the FASTOPEN command file.

pd: Specifies the drive to process.

[=nnn] Specifies the number of directories or

files to remember for the drive

specified as pd:. If no number is

specified, the default of 34 is used.

The range of numbers specified must be

between 10 and 999. In addition, the sum

of all nnn files cannot exceed 999.

FASTOPEN is used to speed up access of files on hard disks

with complex directory structures.

EXAMPLE

FASTOPEN C:100

instructs DOS to remember the locations of the last 100

directories or files that were opened on drive C.

MESSAGES

Cannot use FASTOPEN for drive x

FASTOPEN can be used only on hard disk drives. It cannot be used

on floppy drives or on network drives, or on drives that have

been operated on with the JOIN, SUBST, or ASSIGN command.

FASTOPEN already installed

FASTOPEN has already been loaded. No action is required.

Same drive specified more than once

Reenter the command, specifying each drive letter once.

Too many drive entries

You have specified too many drive letters. Reenter the command

with fewer drive letters.

Too many name entries

You have specified a number greater than 999. Change the number

to less than 999 and try again.

NOTES

FASTOPEN is used only once, and it is usually placed in the

AUTOEXEC.BAT file.

The minimum number of directories or file entries that

FASTOPEN remembers the location of is 10; the maximum is 999. The

number you assign should be greater than the deepest level of

subdirectory you are using. If you access more than the number of

files you specified during a session, the least recently accessed

file is removed from the list and replaced by the most recently

accessed file.

------------------------------------------------------------------

[For related topics, press R]

SEE ALSO

ASSIGN Command

JOIN Command

SUBST Command



See also:


file: /Techref/dos/command/fastopen.htm, 2KB, , updated: 1999/2/20 10:24, local time: 2017/12/15 04:24,
TOP NEW HELP FIND: 
54.221.93.187:LOG IN

 ©2017 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/dos/command/fastopen.htm"> dos command fastopen</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2017 contributors:
o List host: MIT, Site host massmind.org, Top posters @20171215 RussellMc, Van Horn, David, Sean Breheny, James Cameron, alan.b.pearce, IVP, Neil, Bob Blick, David C Brown, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .