BREAK + Checking Whether Break Was Invoked
Controls circumstances under which DOS checks for the Ctrl-C
or Break key (Ctrl-Break on the IBM PC) while programs are
MS-DOS equivalent: BREAK (2.0+)
ON Sets BREAK to on. BREAK ON allows
interruption of programs while they are
not performing input or output to the
console, the printer, or auxiliary
OFF Sets BREAK to off (the default).
sets BREAK to ON. To see the status of the command, issue it with
BREAK is on
With BREAK set to OFF, DOS checks only when it performs a
screen or keyboard system call or carries out a printer or other
auxiliary device operation. Specifying ON instructs DOS to check
to see whether the Break key combination has been pressed before
it performs any system call. You can specify BREAK = ON in your
[For related topics, press R]
|file: /Techref/dos/command/break.htm, 1KB, , updated: 1999/2/20 11:24, local time: 2018/6/19 09:07,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/dos/command/break.htm"> dos command break</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180619 RussellMc, Van Horn, David, Isaac M. Bavaresco, Sean Breheny, Neil, David C Brown, Bob Blick, Denny Esterline, Brent Brown, alan.b.pearce,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!