please dont rip this site

Printed Circuit Board CAD

Protel Users FAQ

CadsoftUSA Eagle CAD new user notes

OrCAD

Software and Services

Or if you like the minimal approach: A 'Sharpie' permanent marker works great as a etch-resistant pen

Also:

See also:

Archive:

Questions:

Comments:

Code:

To convert a standard board image to an outline for isolation etch or mill using Photoshop:

1.) Load the board image

2.) select magic wand - make sure anti-alias & contigous is disabled.

3.) click/select the black color (non copper area) this will select all the black color since contigous option is disabled.

4.) contract the selection/marque to 5 pixels. From Menu: Select->Modify->Contract, then choose 5.

5.) Hit del key, to delete the selection/marque.

6.) Now etch the PCB with your favorite solution.

One users opinion:

Frequency User Recomendation Comment
Rare Hobbiest Express PCB
expresspcb.com
You will not be able to move to another package later and they may upgrade the program and invalidate your files. Other than that, it is the easyist, quickest, cheapest way.
Pro Hire out the work Pay someone to design it for you. Concentrate on what you know.
Regular Hobbiest TCI Most of the features of ExpressPCB, all that you need. Makes Gerbers directly so can be used with just about any board house
Pro ? There are lots of options here...
Often Hobbiest Eagle
cadsoftusa.com
The very strange user interface and quirks will waste a lot of your time at first, but eventually, you will be able to make really nice boards and do just about anything the pro's can do.
Pro Protel All in all, over all, and in general, this is the one...


file: /Techref/pcbcads.htm, 18KB, , updated: 2020/10/2 18:46, local time: 2024/3/19 03:38, owner: DAV-MP-E62a,
TOP NEW HELP FIND: 
52.205.218.160:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.piclist.com/techref/pcbcads.htm"> Printed Circuit Board Computer Aided Design and Manufacturing</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed? From: "/pcbcads.htm"

  PICList 2024 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .