please dont rip this site

;  EAGLE Autorouter Control File

[Default]

  RoutingGrid     = 0.8mm

  ; Trace Parameters:

  tpViaShape      = Round

  ; Preferred Directions:

  PrefDir.1       = |
  PrefDir.2       = 0
  PrefDir.3       = 0
  PrefDir.4       = 0
  PrefDir.5       = 0
  PrefDir.6       = 0
  PrefDir.7       = 0
  PrefDir.8       = 0
  PrefDir.9       = 0
  PrefDir.10      = 0
  PrefDir.11      = 0
  PrefDir.12      = 0
  PrefDir.13      = 0
  PrefDir.14      = 0
  PrefDir.15      = 0
  PrefDir.16      = -

  Active          =    1
  ; Cost Factors:

  cfVia           =    8
  cfNonPref       =    5
  cfChangeDir     =    2
  cfOrthStep      =    2
  cfDiagStep      =    3
  cfExtdStep      =    0
  cfBonusStep     =    1
  cfMalusStep     =    1
  cfPadImpact     =    4
  cfSmdImpact     =    4
  cfBusImpact     =    0
  cfHugging       =    3
  cfAvoid         =    4
  cfPolygon       =   10

  cfBase.1        =    0
  cfBase.2        =    1
  cfBase.3        =    1
  cfBase.4        =    1
  cfBase.5        =    1
  cfBase.6        =    1
  cfBase.7        =    1
  cfBase.8        =    1
  cfBase.9        =    1
  cfBase.10       =    1
  cfBase.11       =    1
  cfBase.12       =    1
  cfBase.13       =    1
  cfBase.14       =    1
  cfBase.15       =    1
  cfBase.16       =    0

  ; Maximum Number of...:

  mnVias          =   20
  mnSegments      = 9999
  mnExtdSteps     = 9999
  mnRipupLevel    =   10
  mnRipupSteps    =  100
  mnRipupTotal    =  100

[Busses]

  @Route

  Active          =    1
  cfNonPref       =    4
  cfBusImpact     =    4
  cfHugging       =    0
  mnVias          =    0

[Route]

  @Default

  Active          =    1

[Optimize1]

  @Route

  Active          =    1
  cfVia           =   99

[Optimize2]

  @Optimize1

  Active          =    1
  cfExtdStep      =   10
  cfHugging       =    1
  mnExtdSteps     =    1
  mnRipupLevel    =    0

[Optimize3]

  @Optimize2

  Active          =    1
  cfNonPref       =    0
  cfChangeDir     =    6
  cfExtdStep      =    0
  cfBonusStep     =    2
  cfMalusStep     =    2
  cfPadImpact     =    2
  cfSmdImpact     =    2
  cfHugging       =    0

[Optimize4]

  @Optimize3

  Active          =    1
  cfChangeDir     =    8
  cfPadImpact     =    0
  cfSmdImpact     =    0
  mnVias          =  100



file: /images/boards/avrbot/MyRobot.ctl, 2KB, , updated: 2003/5/21 06:57, local time: 2012/2/10 06:22,
TOP NEW HELP FIND: 
38.107.179.231:LOG IN

 ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/images/boards/avrbot/MyRobot.ctl"> </A>

Did you find what you needed?

 
Stepper motors CAN be smooth!
And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:
o 18th microstep
o Linear smoothing
  o Open source
o Full kit $25!
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .