please dont rip this site

A simple RTOS for microcontrollers based upon concepts of FreeRTOS

This file is part of SimpleRTOS2

by Isaac Marino Bavaresco

This is file "Test\TestTasks-PIC32MX.c"

/*============================================================================*/
/*
SimpleRTOS - Very simple RTOS for Microcontrollers - PIC32 port
v2.00 (2014-01-21)
isaacbavaresco@yahoo.com.br
*/
/*============================================================================*/
/*
 Copyright (c) 2007-2014, Isaac Marino Bavaresco
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
     * Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
     * Neither the name of the author nor the
       names of its contributors may be used to endorse or promote products
       derived from this software without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY
 EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*============================================================================*/
#include <string.h>
#include <plib.h>
#include "../SimpleRTOS/SimpleRTOS.h"
#include "../SimpleRTOS/Mutex.h"
#include "../SimpleRTOS/SerialPIC32MX.h"
/*============================================================================*/
#include "Test.h"
/*============================================================================*/
mutex_t Mutex = { NULL, NULL, 0, 0 };
/*============================================================================*/
void MutexTask1( void *param )
    {
    static const char   Message[] = "Hello world!\r\n";
    const char          *p;
    int                 i;

    while( 1 )
        {
        /* We will wait undefinitely until we get the mutex. */
        if( MutexTake( &Mutex, -1 ))
            {
            /* Transmit the whole string. */
            for( i = strlen( Message ), p = Message; i; i--, p++ )
                /* Transmit one char. While there is no room for new chars... */
                SerialTransmit( UART1, *p, -1 );
#if 0
            /* Wait for the last byte to be transmitted. */
            while( TransmitInProgress() )
                vSleep( 1 );
#endif
            /* Let's punish the other task a little. */
            vSleep( 31 );

            /* Do not forget to give the mutex back. */
            MutexGive( &Mutex, 1 );
            }
        vSleep( 1 );
        }
    }
/*============================================================================*/
void MutexTask2( void *param )
    {
    static const char   Message[] = "I took over the world!\r\n";
    const char          *p;
    int                 i;

    while( 1 )
        {
        /* Try to take the mutex within a narrow time window */
        /* As the other task takes much more time, this one will get */
        /* the mutex less often. */
        if( MutexTake( &Mutex, -1 ))
            {
            /* Transmit the whole string. */
            for( i = strlen( Message ), p = Message; i; i--, p++ )
                /* While there is no room for new chars... */
                SerialTransmit( UART1, *p, -1 );

            vSleep( 2 );

            /* Do not forget to give the mutex back. */
            MutexGive( &Mutex, 1 );
            }
        else
            vSleep( 2 );
        }
    }
/*============================================================================*/
/* Sort of a "poor man's" SIGNAL. */
int Die     = 0;

int Alive   = 0;
/*============================================================================*/
void SuicideTask( void *param )
    {

    /* Make sure the loop will repeat at least once. */
    Die = 0;

    while( 1 )
        {
        /* Somebody told us to die... */
        if( Die )
            {
            /* Clean-up before exitting. */
/*          LATAbits.LATA0  = 0; */
            Alive           = 0;
            /* Die pigy, die. */
            DeleteTask( NULL );
            }

        /* Just a silly thing to do. */
/*      LATAbits.LATA0 = ! LATAbits.LATA0; */

        vSleep( 2 );
        }
    }
/*============================================================================*/
void VictimTask( void *param )
    {
    while( 1 )
        {
        /* Another silly thing. */
/*      LATAbits.LATA1     = ! LATAbits.LATA1; */
        vSleep( 3 );
        }
    }
/*============================================================================*/
void TaskRX( void *param )
    {
    context_t   *Victim = NULL;
    int         i;

    while( 1 )
        {
        /* Wait for a character. */
        i = SerialReceive( UART1, -1 );

        switch( (unsigned char)i )
            {
            /* Start the suicide task. */
            case 's':
                /* We should not create an already created task. */
                if( ! Alive )
                    {
                    /* The task was created succesfully... */
                    if( CreateTask( Stacks[4], sizeof Stacks[4], NULL, GetAddress( SuicideTask ), 1 ) != NULL )
                        /* ... flag it. */
                        Alive   = 1;
                    }
                break;

            /* Tell the suicide task to die. */
            case 'd':
                Die     = 1;
                break;

            /* Create the victim task. */
            case 'v':
                /* If the task is not already created... */
                if( Victim == NULL )
                    {
                    /* ... create it. */
                    Victim = CreateTask( Stacks[5], sizeof Stacks[5], NULL, GetAddress( VictimTask ), 1 );
                    }
                break;

            /* Kill the victim task. */
            case 'k':
                /* If the task is alive... */
                if( Victim != NULL )
                    {
                    /* ... kill it... */
                    DeleteTask( Victim );
                    /* ... and flag it. */
                    Victim  = NULL;
                    }
                break;
            }
        }
    }
/*============================================================================*/
/*

At least one tasks must never block (i.e. call Sleep, call MutexTake or
QueueWrite or QueueRead with a delay argument different than zero, try to
delete itself, etc.) or the system will hang.

If your application doesn't have a task that can never block, then an additional
task must be created to perform this role (it would be the equivalent to
FreeRTOS's Idle Task, but with SimpleRTOS we can save this additional task
whenever possible).

This task may call Yield though.

*/
/*============================================================================*/
void MainTask( void *param )
    {
    unsigned long i = 0;

    SerialPortInitMinimal( UART1, 115200 );
    MutexInit( &Mutex, MUTEX_SWITCH_IMMEDIATE );

    /* Create the other tasks... */
    CreateTask( Stacks[1], sizeof Stacks[1], NULL, GetAddress( TaskRX ), 2 );
    CreateTask( Stacks[2], sizeof Stacks[2], NULL, GetAddress( MutexTask1 ), 2 );
    CreateTask( Stacks[3], sizeof Stacks[3], NULL, GetAddress( MutexTask2 ), 1 );

/*

When debugging we will simulate reception of serial characters using a timer
interrupt, see file SerialPIC32MX.c.

MPLAB SIM doesn't seem to support Timer2, so we use the core timer.
Under PICKit3 and ICD3 the core timer doesn't freeze so we use Timer2.

*/

#if         defined __DEBUG
#if         defined __MPLAB_DEBUGGER_ICD3 || defined __MPLAB_DEBUGGER_PK3
    OpenTimer2( T2_ON | T2_PS_1_4, 40000 );
    INTSetVectorPriority( INT_TIMER_2_VECTOR, configKERNEL_INTERRUPT_PRIORITY );
    INTSetVectorSubPriority( INT_TIMER_2_VECTOR, INT_SUB_PRIORITY_LEVEL_0 );
    INTClearFlag( INT_T2 );
    INTEnable( INT_T2, INT_ENABLED );
#else   /*  defined __MPLAB_DEBUGGER_ICD3 || defined __MPLAB_DEBUGGER_PK3 */
    OpenCoreTimer( 80000 );
    INTSetVectorPriority( INT_CORE_TIMER_VECTOR, configKERNEL_INTERRUPT_PRIORITY );
    INTSetVectorSubPriority( INT_CORE_TIMER_VECTOR, INT_SUB_PRIORITY_LEVEL_0 );
    INTClearFlag( INT_CT );
    INTEnable( INT_CT, INT_ENABLED );
#endif  /*  defined __MPLAB_DEBUGGER_ICD3 || defined __MPLAB_DEBUGGER_PK3 */
#endif  /*  defined __DEBUG */

    while( 1 )
        {
        /* Some very computationally intensive calculations. */
        i++;

        /* Output the results. */
/*      PORTA   = (unsigned char)i; */

        /* Give a chance for the other tasks, but return ASAP. */
        Yield();
        }
    }
/*============================================================================*/
void TickHook( void )
    {
    }
/*============================================================================*/


file: /Techref/member/IMB-yahoo-J86/TestTasks-PIC32MX.c.htm, 10KB, , updated: 2014/2/16 04:49, local time: 2024/3/19 04:11, owner: IMB-yahoo-J86,
TOP NEW HELP FIND: 
52.205.218.160:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.piclist.com/Techref/member/IMB-yahoo-J86/TestTasks-PIC32MX.c.htm"> A simple RTOS for microcontrollers based upon concepts of FreeRTOS</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?