please dont rip this site

A simple RTOS for microcontrollers based upon concepts of FreeRTOS

This file is part of SimpleRTOS2

by Isaac Marino Bavaresco

This is file "SimpleRTOS\PortPIC18-ASM.asm"

; I found the following message in Microchip's support site. The URL is:
; http://support2.microchip.com/KBSearch/KB_Ticket.aspx?ID=Tt6UJ9A0003LM
;
; Unfortunately these pseudo-instructions don't work as inline assembly,
; so I had to make this separate .asm module.
; The functions are used inside 'port.c' and are called by 'pxPortInitialiseStack'
; (GetTMPDATALen, GetTMPDATAStrt, GetMATHDATALen, GetMATHDATAStrt) and
; by the macros 'portSAVE_CONTEXT' (SaveTMP_MATH) and 'portRESTORE_CONTEXT'
; (RestoreTMP_MATH').

;-------------------------------------------------------------------------------
; Start of the message:
;-------------------------------------------------------------------------------
;
; Issue
;
; I'm developping a RTOS for the PIC18F258 using MPLAB-C18. I need to save in the
; task context the "MATH_DATA" and ".tmpdata" sections. But their address and size
; are only known after linking. The question is: How can I know the address and
; size of both sections at run time?
;
; Thanks
;
; Solution
; You CAN get the section location and size at runtime using MPASM.
; There are a few undocumented operators and pseudo-instructions.
;
; The SCNSZ operators give you the size of the section.
; The SCNSTART operators give you the starting address of a section.
; The SCNEND operators give you the ending address of a section.
; The SCNSTART_LFSR pseudo-instruction gives you an LFSR instruction with the starting address of the section.
; The SCNEND_LFSR pseudo-instruction gives you an LFSR instruction with the ending address of the section.
;
; Example:
; CODE
; movlw SCNSZ_LOW .tmpdata
; movlw SCNSZ_HIGH .tmpdata
; movlw SCNSZ_UPPER .tmpdata
; movlw SCNSTART_LOW .tmpdata
; movlw SCNSTART_HIGH .tmpdata
; movlw SCNSTART_UPPER .tmpdata
; movlw SCNEND_LOW .tmpdata
; movlw SCNEND_HIGH .tmpdata
; movlw SCNEND_UPPER .tmpdata
;
; SCNSTART_LFSR 0, .tmpdata
; SCNEND_LFSR 0, .tmpdata
;
; END
;
; These operators and pseudo-instructions will be documented in the next revision
; of the MPASM User's Guide.
;
;-------------------------------------------------------------------------------
; End of the message
;-------------------------------------------------------------------------------

;===============================================================================
; Copyright (c) 2007-2008, Isaac Marino Bavaresco
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;     * Redistributions of source code must retain the above copyright
;       notice, this list of conditions and the following disclaimer.
;     * Neither the name of the author nor the
;       names of its contributors may be used to endorse or promote products
;       derived from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY
; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;===============================================================================
; isaacbavaresco@yahoo.com.br
;===============================================================================
#include <P18CXXX.INC>
;===============================================================================
        radix   decimal
;===============================================================================
        code
;===============================================================================
        global  GetTMPDATAStrt

GetTMPDATAStrt: movlw   SCNSTART_LOW .tmpdata
        movwf   PRODL
        movlw   SCNSTART_HIGH .tmpdata
        movwf   PRODH
        return  0
;===============================================================================
        global  GetTMPDATALen

GetTMPDATALen:  movlw   SCNSZ_LOW .tmpdata
        return  0
;===============================================================================
        global  GetMATHDATAStrt
GetMATHDATAStrt:movlw   SCNSTART_LOW MATH_DATA
        movwf   PRODL
        movlw   SCNSTART_HIGH MATH_DATA
        movwf   PRODH
        return  0
;===============================================================================
        global  GetMATHDATALen
GetMATHDATALen: movlw   SCNSZ_LOW MATH_DATA
        return  0
;===============================================================================
        global  SaveTMP_MATH

SaveTMP_MATH:
        SCNSTART_LFSR 0, .tmpdata
        movlw   SCNSZ_LOW .tmpdata
SaveLoop1:  movff   POSTINC0,PREINC1
        addlw   -1
        bnz SaveLoop1

        SCNSTART_LFSR 0, MATH_DATA
        movlw   SCNSZ_LOW MATH_DATA
SaveLoop2:  movff   POSTINC0,PREINC1
        addlw   -1
        bnz SaveLoop2

        return  0
;===============================================================================
        global  RestoreTMP_MATH

RestoreTMP_MATH:
        SCNEND_LFSR 0, MATH_DATA
        movlw   SCNSZ_LOW MATH_DATA
RestoreLoop1:   movff   POSTDEC1,POSTDEC0
        addlw   -1
        bnz RestoreLoop1

        SCNEND_LFSR 0, .tmpdata
        movlw   SCNSZ_LOW .tmpdata
RestoreLoop2:   movff   POSTDEC1,POSTDEC0
        addlw   -1
        bnz RestoreLoop2

        return  0
;===============================================================================
        end
;===============================================================================

file: /Techref/member/IMB-yahoo-J86/PortPIC18-ASM.asm.htm, 6KB, , updated: 2016/1/14 20:37, local time: 2024/3/18 23:44, owner: IMB-yahoo-J86,
TOP NEW HELP FIND: 
34.204.181.19:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.piclist.com/Techref/member/IMB-yahoo-J86/PortPIC18-ASM.asm.htm"> A simple RTOS for microcontrollers based upon concepts of FreeRTOS</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?