please dont rip this site

This file is part of OneWire routines

by Isaac Marino Bavaresco

This is file "DS18B20.h"
/*============================================================================*/
/*
 Copyright (c) 2016-2019, Isaac Marino Bavaresco
 All rights reserved.
 isaacbavaresco@yahoo.com.br

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
     * Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
     * Neither the name of the author nor the
       names of its contributors may be used to endorse or promote products
       derived from this software without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY
 EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*============================================================================*/
#if         !defined __DS18B20_H__
#define __DS18B20_H__
/*============================================================================*/
#include "OneWire.h"
/*============================================================================*/
#define DS18B20_SCRATCHPAD_SIZE                8
/*============================================================================*/
#define DS18B20_COMMAND_CONVERT_TEMPERATURE 0x44
#define DS18B20_COMMAND_READ_SCRATCHPAD     0xBE
/*============================================================================*/
#define DS18B20_FAMILY_CODE                 0x28
/*============================================================================*/
onewirestatus_t DS18B20StartConversion  ( const ibuttonsn_t *SerialNumber );
onewirestatus_t DS18B20ReadTemperature  ( const ibuttonsn_t *SerialNumber, short *Temperature );
/*============================================================================*/
#endif  /*  !defined __DS18B20_H__ */
/*============================================================================*/


file: /Techref/member/IMB-yahoo-J86/DS18B20.h.htm, 2KB, , updated: 2019/8/19 15:50, local time: 2019/9/22 19:02, owner: IMB-yahoo-J86,
TOP NEW HELP FIND: 
3.227.233.55:LOG IN

 ©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/Techref/member/IMB-yahoo-J86/DS18B20.h.htm"> OneWire routines - DS18B20.h</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?